Download Vivo V21E PD2107F Stock Firmware [Flash File]

Vivo V21E PD2107F Stock Rom (Flash File) for repairing your device if you have experienced bootloop, System errors, Unbrick dead after flash, Screen Lock, Pattern Lock, FRP / Google Account, hanging and dead problems. Flash stock firmware using QFIL or OTA Update.



Download Vivo V21E PD2107F Stock Firmware [Flash File]

Vivo V21E PD2107F Official Firmware Update (Full OTA)

Firmware Information
File NamePD2107F_EX_A_1.10.1-update-full_1623835171.zip
RegionGlobal
File TypeOTA File
Device SupportsPD2107F
File Size3.3 GB
Flash MethodUsing Recovery / OTA Update

Vivo V21E PD2107F Firmware Free Download

Firmware Information
File NamePD2107F_EX_A_1.11.3_LA.UM.9.1.r1-04900-SMx1-Common_Split_QPST.zip
RegionGlobal
File TypeSplit File
Device SupportsPD2107F
File Size8.2 GB
Flash MethodUsing QFIL / AFTool

Download Vivo V21E PD2107F Flash Tool + USB Driver



How To install OTA Update Vivo V21E PD2107F Using Micro SD card

  1. First, you need to download the firmware phone storade or Micro SD Card.
  2. The Turn Off your phone.
  3. Now press and hold the power and Vol UP button until your phone vivo logo appears then release your phone booted in fastboot mode, Now select Recovery mode.
  4. Now Select Install Update and find the firmware from phone storage or Micro SD Card.
  5. Click to install and wait until success.
  6. Done.


How To Flash Stock ROM On V21E PD2107F Using QFIL


  1. Download and install Qualcomm USB Driver on your Computer (If you have already installed the Qualcomm USB Driver on your computer, skip this step)
  2. Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files:
  3. Now, Run the QFIL tool
  4. QFIL is launched
  5. Connect the device to the computer while in EDL Mode (device should be in EDL before connecting to pc). No Port Available should change to Qualcomm HS-USB QDLoader 9008
  6. Under Select Build Type, tick Flat Build
  7. Under Select Programmer, click Browse. In the Window that pops up, highlight the loader file (usually named prog_emmc_firehose_****.mbn) and click Open
  8. Click Load XML
  9. In the Window that pops up, highlight the rawprogram() file then click Open
  10. Another Window will automatically pop up, highlight the patch() file then click Open
  11. Click Download, QFIL should start flashing the firmware, Do Not interrupt
  12. You should get Download Succeed Finish Download once QFIL has successfully flashed the firmware. 
  13. Disconnect the device and boot up

Disclaimer:

Don't forget backup all data and files on your phone before flashing or installing the stock rom. As this helps you to recover the personal data whenever any thing wrong happens. All the risks we are not responsible.

No comments:

Post a Comment