Obi SF1 Stock Firmware Rom (Flash File) for repairing your device if you have experienced bootloop, System errors, Unbrick dead after flash, Screen Lock, Pattern Lock, FRP / Google Account, hanging and dead problems. Flash Stock Firmware using QPST or QFIL Tool.
Obi SF1 Firmware Free Download
Firmware Information | |
---|---|
File Name | OBI_SF1_V2.9_151216.zip |
Flash Type | Split File |
Device Support | Obi Worldphone SF1 |
File Size | 990 MB |
Flash Method | Using QPST / QFIL |
Obi SF1 Flashtool + USB Driver
- USB Driver: Qualcomm USB Driver
- Flash Tool: QFIL Tool All Version
How To Flash Stock ROM On Obi SF1 Using QFIL
- Download and install Qualcomm USB Driver on your Computer (If you have already installed the Qualcomm USB Driver on your computer, skip this step)
- Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files:
- Now, Run the QFIL tool
- QFIL is launched
- Connect the device to the computer while in EDL Mode (device should be in EDL before connecting to pc). No Port Available should change to Qualcomm HS-USB QDLoader 9008
- Under Select Build Type, tick Flat Build
- Under Select Programmer, click Browse. In the Window that pops up, highlight the loader file (usually named prog_emmc_firehose_****.mbn) and click Open
- Click Load XML
- In the Window that pops up, highlight the rawprogram() file then click Open
- Another Window will automatically pop up, highlight the patch() file then click Open
- Click Download, QFIL should start flashing the firmware, Do Not interrupt
- You should get Download Succeed Finish Download once QFIL has successfully flashed the firmware.
- Disconnect the device and boot up
Disclaimer:
Don't forget backup all data and files on your phone before flashing or installing the stock rom. As this helps you to recover the personal data whenever any thing wrong happens. All the risks we are not responsible.
No comments:
Post a Comment